Aalianvari, Ali Critical Review of Scientific Studies on Rock Brittleness Index: An Overview Analysis [Volume 1, Issue 3, 2023, Pages 103-110]
Aalianvari, Ali Hydrogeological Risk Assessment of Tunnel Excavation Using a Hybrid AHP-AI Model: A Case Study [Volume 3, Issue 2, 2025, Pages 140-146]
Aalianvari, Ali Field-Based Assessment of Analytical and Statistical Grout Take Models: Case Studies [Volume 3, Issue 4, 2025, Pages 215-224]
Abd-Alameer, Irwaa NazarEmploying Well Logging Data to Generate a Synthetic Model of the Formation Rock Density Applying the ANN Approach [Volume 3, Issue 3, 2025, Pages 147-154]
Abdollahzadeh, Ali Akbar Reconciliation of data with non-random errors [Volume 1, Issue 4, 2023, Pages 171-178]
Abedi, Maysam Geoelectrical modeling of time-domain electrical resistivity and induced polarization data for imaging marble building stone [Volume 3, Issue 1, 2025, Pages 70-81]
Adham Hashemi, Seyed Amirhossein Evaluating the Effect of the Number of Realizations on Ore Grade Modeling and Estimation Using Sequential Gaussian Simulation and Sequential Indicator Simulation [Volume 3, Issue 4, 2025, Pages 250-262]
Ahmadi, Morteza Investigation of the Effect of Rock characteristics on Crack Initiation and Crack Damage Stress Levels in Intact Rock Direct Shear Tests [Volume 2, Issue 1, 2024, Pages 43-49]
Ahmadi, Morteza Numerical Analysis of Time-Dependent Behavior of Salt Cavern with Weak Interlayer [Volume 3, Issue 1, 2025, Pages 55-69]
Akbari, Ali Machine Learning-Based Predictions for Toyoura Sand Constitutive Behaviors Under Triaxial Compression Monotonic Loadings [Volume 3, Issue 1, 2025, Pages 36-54]
Akbari, Ali Geomechanical Modeling and Sensitivity Analysis of Fracture Propagation in Hydraulic Fracturing Operation [Volume 3, Issue 4, 2025, Pages 263-272]
Akhtar, Shamim Manufacturing Of Cement And Petrography Of Its Raw Materials [Volume 2, Issue 2, 2024, Pages 50-57]
Alidaryan, Mohsen Investigation of the Effect of Rock characteristics on Crack Initiation and Crack Damage Stress Levels in Intact Rock Direct Shear Tests [Volume 2, Issue 1, 2024, Pages 43-49]
Alimoradi, Andisheh Application of Supervised Machine Learning Inversion in the Estimation of Iron Ore Grade from Geophysical Data: Comparative Investigation of GB, RF and SVM Algorithms [Volume 1, Issue 3, 2023, Pages 123-136]
Alimoradi, Andisheh Optimizing Drilling Fluid Properties Using Deep Learning Algorithms to Reduce Drilling Problems in a Middle Eastern Oil Field [Volume 2, Issue 1, 2024, Pages 1-12]
Alizadeh Matak, Sahar AI-based smart marketing for enhancing environmental restoration project efficiency in the mining industry [Volume 4, Issue 1, 2026, Pages 53-67]
Alizadeh Sani, Mohsen Support of squeezing rocks in underground coal mines, case study: slope no. 2 of Parvadeh no. 1 mine [Volume 4, Issue 2, 2026, Pages 131-142]
Al-kanaani, Nuhad A. A Comparative Study on the Prediction of Unconfined Compressive Strength for the Sandstone Formations Based on Well Logging Data [Volume 3, Issue 3, 2025, Pages 165-173]
Al-Shuwaili, Jasim Mohammed Yaseen Application of Geomechanical Modeling and Determination of Optimal Rock Fracture Criteria in the Design of Mud Weight in One of the Southern Iraq Oil Fields [Volume 3, Issue 1, 2025, Pages 8-23]
AlShwelie, Yousif Helal Sultan Design of Wellbore Trajectory Using Geomechanical Modeling for Improving Wellbore Stability: A Case Study [Volume 2, Issue 1, 2024, Pages 27-35]
Al-Zuobaidi, Ali A. A Comparative Study on the Prediction of Unconfined Compressive Strength for the Sandstone Formations Based on Well Logging Data [Volume 3, Issue 3, 2025, Pages 165-173]
Amini, Erfan Investigation of the Effect of Rock characteristics on Crack Initiation and Crack Damage Stress Levels in Intact Rock Direct Shear Tests [Volume 2, Issue 1, 2024, Pages 43-49]
Amiri, Mehrdad Predicting uniaxial compressive strength of different rocks using principal component analysis and deep neural network [Volume 2, Issue 2, 2024, Pages 78-89]
Amiri, Mojtaba Predicting uniaxial compressive strength of different rocks using principal component analysis and deep neural network [Volume 2, Issue 2, 2024, Pages 78-89]
Amiri Hosseini, Mohammad Field evaluation of air-deck blasting for improving rock fragmentation at the Gol-e-Gohar no. 1 open-pit iron ore mine, Iran [Volume 4, Issue 1, 2026, Pages 68-78]
Angardi, Shahram Seismic Analysis of Sediments in the Tabriz Plain Using Metaheuristic Algorithms and Shear Wave Velocity Modeling [Volume 2, Issue 2, 2024, Pages 58-68]
Arasteh, Hossein Ventilation system design and main fan selection for block 3 of the Parvadeh 4 coal mine based on three-dimensional airflow simulation [Volume 4, Issue 1, 2026, Pages 79-90]
Arman, Mohsen AI-based smart marketing for enhancing environmental restoration project efficiency in the mining industry [Volume 4, Issue 1, 2026, Pages 53-67]
Aryafar, Ahmad Environmental Risk Analysis of Mine Tailings Dam (A Case Study in Iran) [Volume 2, Issue 1, 2024, Pages 21-26]
Aryafar, Ahmad Assessment of Environmental Hazards in a Mine Tailings Dam Using the Fuzzy SAM Method [Volume 3, Issue 3, 2025, Pages 182-187]
Ataei, Mohammad Mapping solar energy potential in the mining sector: A hybrid Fuzzy-AHP approach in South Khorasan Province, Iran [Volume 4, Issue 1, 2026, Pages 17-37]
Ataei, Mohammad Field evaluation of air-deck blasting for improving rock fragmentation at the Gol-e-Gohar no. 1 open-pit iron ore mine, Iran [Volume 4, Issue 1, 2026, Pages 68-78]
Ayeneh, Amin Stability Analysis and Support System Timing for Mine Block 3 of Parvadeh 4 Coal Mine Using Numerical Modelling [Volume 3, Issue 1, 2025, Pages 24-35]
Ayeneh, Amin Ventilation system design and main fan selection for block 3 of the Parvadeh 4 coal mine based on three-dimensional airflow simulation [Volume 4, Issue 1, 2026, Pages 79-90]
Azimi, Ali Production Scheduling of Sublevel Caving underground mining method Using a conceptual Linear Modeling and by considering of ventilation constraints [Volume 3, Issue 1, 2025, Pages 1-7]
Azimi, Ebrahim A Review on the Heap Bioleaching of Copper from Low-Grade Fine Tailings [Volume 1, Issue 4, 2023, Pages 150-158]
B
Bahaaddini, Mojtaba Investigation of the Effect of Rock characteristics on Crack Initiation and Crack Damage Stress Levels in Intact Rock Direct Shear Tests [Volume 2, Issue 1, 2024, Pages 43-49]
Bakhtiyari Manesh, Keivan Comparative study of the effect of additives in water-based drilling mud on filtrate volume, along with presentation of an artificial neural network estimator model [Volume 4, Issue 2, 2026, Pages 115-130]
Bejari, Hadi Mineral Exploration Potential Mapping through Fuzzy AHP Integration: A Case Study from the Kamoshgaran Region, Northwestern Iran [Volume 3, Issue 4, 2025, Pages 201-214]
D
Daya, Ali Akbar Mineral Exploration Potential Mapping through Fuzzy AHP Integration: A Case Study from the Kamoshgaran Region, Northwestern Iran [Volume 3, Issue 4, 2025, Pages 201-214]
Dehghan, Saeed Recovery of Iron Ore From The Tailings of Tang Zagh Iron Beneficiation Plant: A Comparative Study of Gravity and Magnetic Separation Methods [Volume 1, Issue 3, 2023, Pages 137-143]
Dehghan, Saeed Beneficiation of low-grade iron ore using individual and combined gravity and magnetic methods [Volume 4, Issue 2, 2026, Pages 91-101]
E
Ebadinia, Zohreh Assessment of Environmental Hazards in a Mine Tailings Dam Using the Fuzzy SAM Method [Volume 3, Issue 3, 2025, Pages 182-187]
Ebrahimi, Javad Field-Based Assessment of Analytical and Statistical Grout Take Models: Case Studies [Volume 3, Issue 4, 2025, Pages 215-224]
Eftekhari, Seyyed Ali Improving the accuracy of critical downhole equipment detection using unsupervised machine learning and deep learning methods [Volume 4, Issue 1, 2026, Pages 38-52]
Eidpoor, Adel Use of Well Logging Data to Estimate Fluid Saturation Based on Artificial Neural Network Algorithms [Volume 3, Issue 2, 2025, Pages 93-105]
Emami, Enayatallah Manufacturing Of Cement And Petrography Of Its Raw Materials [Volume 2, Issue 2, 2024, Pages 50-57]
Enos, Masolwa KEvaluating the performance of operational variables in the sodium cyanide gold leaching process: A review article [Volume 4, Issue 2, 2026, Pages 143-165]
Esmaeili, Zohreh Petrology and temperature determination of skarn formation in Dezg area, southwestern of Hajiabad, north of Birjand [Volume 2, Issue 2, 2024, Pages 69-77]
Esmaeily, Zohre Petrology of the Metabasites of Dezg ophiolite melange complex, South-East of Qayen [Volume 1, Issue 1, 2023, Pages 37-46]
F
Fakhimi, Afsaneh Numerical Analysis of Time-Dependent Behavior of Salt Cavern with Weak Interlayer [Volume 3, Issue 1, 2025, Pages 55-69]
Farasat, Amir Improving the accuracy of critical downhole equipment detection using unsupervised machine learning and deep learning methods [Volume 4, Issue 1, 2026, Pages 38-52]
Farasat, Mojtaba Improving the accuracy of critical downhole equipment detection using unsupervised machine learning and deep learning methods [Volume 4, Issue 1, 2026, Pages 38-52]
Farhadian, Hadi Investigating the effect of Beecher type fractures on tunnel displacement using the finite element method [Volume 1, Issue 1, 2023, Pages 1-6]
Farhadian, Hadi Contribution of geostatistical modeling on simulating a geomechanical parameter (case study: GSI in Gol-Gohar open pit iron mine, Kerman, southeastern Iran) [Volume 1, Issue 2, 2023, Pages 81-91]
Farhadian, Hadi The Role of Nanoclay in the Soil Stabilization: A Short Viewpoint [Volume 1, Issue 2, 2023, Pages 92-102]
Farhadian, Hadi Geostatistical Assessment of Ore Reserve Estimation Accuracy in the Hired Gold Deposit [Volume 3, Issue 3, 2025, Pages 155-164]
Farhadian, Hadi Evaluating the Effect of the Number of Realizations on Ore Grade Modeling and Estimation Using Sequential Gaussian Simulation and Sequential Indicator Simulation [Volume 3, Issue 4, 2025, Pages 250-262]
Fathi, Mahdi Application of Supervised Machine Learning Inversion in the Estimation of Iron Ore Grade from Geophysical Data: Comparative Investigation of GB, RF and SVM Algorithms [Volume 1, Issue 3, 2023, Pages 123-136]
Fathi, Mahdi Optimizing Drilling Fluid Properties Using Deep Learning Algorithms to Reduce Drilling Problems in a Middle Eastern Oil Field [Volume 2, Issue 1, 2024, Pages 1-12]
Feiz, Davood AI-based smart marketing for enhancing environmental restoration project efficiency in the mining industry [Volume 4, Issue 1, 2026, Pages 53-67]
Fotoohi Rad, Gholamreza Petrology of the Metabasites of Dezg ophiolite melange complex, South-East of Qayen [Volume 1, Issue 1, 2023, Pages 37-46]
Fotoohi Rad, Gholamreza Minerals chemistry and petrogenesis of metamorphic rocks of Anjul area, south west of Qayen [Volume 1, Issue 2, 2023, Pages 56-67]
Fotoohi Rad, Gholamreza Petrology and temperature determination of skarn formation in Dezg area, southwestern of Hajiabad, north of Birjand [Volume 2, Issue 2, 2024, Pages 69-77]
G
Geranian, Hamid Application of multivariate decision-making algorithms in the mineral potential mapping; Case study: West Basiran, South Khorasan Province [Volume 1, Issue 1, 2023, Pages 13-21]
Ghadimi, Mostafa Simulation of HD 325-6 Dump truck Tires Performance of Angoran Lead and Zinc Mine [Volume 1, Issue 3, 2023, Pages 111-116]
Ghadimi, Mostafa Optimization of the load transfer mechanism of fully grouted rock bolts by using numerical modeling, genetic and PSO algorithms [Volume 1, Issue 3, 2023, Pages 144-149]
Ghadimi, Mostafa Measurement of Vibrations Due to Blasting in Angouran Surface and Underground Mine on the Stability of Underground Spaces [Volume 3, Issue 2, 2025, Pages 117-125]
Ghadimi, Mostafa A Dynamic Nonlinear Model Based on Economic Adjustment Coefficients for Optimizing Floating Share in Gold Mines under Price Volatility [Volume 3, Issue 4, 2025, Pages 239-249]
Ghanbarpour, Asieh Comparative Evaluation of Dimensionality Reduction Methods for Lithological Unit Discrimination Based on Multi-Element Geochemical Data [Volume 3, Issue 3, 2025, Pages 188-200]
Ghasemi, Alireza Statistical analysis and validation of the cement slurry flow rate calculated by analytical and numerical models in the grouting process [Volume 3, Issue 2, 2025, Pages 82-92]
Ghasemi Tabar, Hassanreza Application of Supervised Machine Learning Inversion in the Estimation of Iron Ore Grade from Geophysical Data: Comparative Investigation of GB, RF and SVM Algorithms [Volume 1, Issue 3, 2023, Pages 123-136]
Gholami, Zahra Evaluating the Effect of the Number of Realizations on Ore Grade Modeling and Estimation Using Sequential Gaussian Simulation and Sequential Indicator Simulation [Volume 3, Issue 4, 2025, Pages 250-262]
H
Hadi, Farqad Ali A Comparative Study on the Prediction of Unconfined Compressive Strength for the Sandstone Formations Based on Well Logging Data [Volume 3, Issue 3, 2025, Pages 165-173]
Haider, Hasnain Manufacturing Of Cement And Petrography Of Its Raw Materials [Volume 2, Issue 2, 2024, Pages 50-57]
Haider, Hasnain Engineering Geological Modeling and Stability Assessment of the Niasar Waterfall Slope Using Advanced Zonation Techniques [Volume 3, Issue 4, 2025, Pages 225-238]
Hamad, Reda JassimPredictive Study to Identify the Sanding Initiation Threshold Depending on Physical and Mechanical Rock Characteristics [Volume 3, Issue 3, 2025, Pages 174-181]
Heidari, Ali Use of Well Logging Data to Estimate Fluid Saturation Based on Artificial Neural Network Algorithms [Volume 3, Issue 2, 2025, Pages 93-105]
Hemmati Ahooi, Hamidreza Application of Supervised Machine Learning Inversion in the Estimation of Iron Ore Grade from Geophysical Data: Comparative Investigation of GB, RF and SVM Algorithms [Volume 1, Issue 3, 2023, Pages 123-136]
Hiji, Morris FEvaluating the performance of operational variables in the sodium cyanide gold leaching process: A review article [Volume 4, Issue 2, 2026, Pages 143-165]
Honarmand, Moones Sunlight-assisted degradation of bromocresol green using Co3O4 nanoparticles as a high performance photocatalyst [Volume 1, Issue 1, 2023, Pages 7-12]
Honarmand, Moones Intensified photodegradation of organic dyes using Bi-doped ZnO nanoparticles [Volume 1, Issue 4, 2023, Pages 159-164]
Hosseini, Ali Analysis of methane emissions sources into the environment of the longwall mining during coal extraction (A case Study) [Volume 2, Issue 1, 2024, Pages 13-20]
Hosseini, Seyyed MohammadRauf A Review on the Heap Bioleaching of Copper from Low-Grade Fine Tailings [Volume 1, Issue 4, 2023, Pages 150-158]
Hosseini Asil, Seyed Mohammad Mehdi Geoelectrical modeling of time-domain electrical resistivity and induced polarization data for imaging marble building stone [Volume 3, Issue 1, 2025, Pages 70-81]
Hussain, Khaliq Manufacturing Of Cement And Petrography Of Its Raw Materials [Volume 2, Issue 2, 2024, Pages 50-57]
I
Issa, Muntadher Adil A Comparative Study on the Prediction of Unconfined Compressive Strength for the Sandstone Formations Based on Well Logging Data [Volume 3, Issue 3, 2025, Pages 165-173]
Issa, Mustafa AdilEmploying Well Logging Data to Generate a Synthetic Model of the Formation Rock Density Applying the ANN Approach [Volume 3, Issue 3, 2025, Pages 147-154]
Issa, Mustafa AdilPredictive Study to Identify the Sanding Initiation Threshold Depending on Physical and Mechanical Rock Characteristics [Volume 3, Issue 3, 2025, Pages 174-181]
Issa, Mustafa Adil A Comparative Study on the Prediction of Unconfined Compressive Strength for the Sandstone Formations Based on Well Logging Data [Volume 3, Issue 3, 2025, Pages 165-173]
J
Jafari, Hossein Rock mass sensitivity and stability of unsupported sublevel stopes: An integrated laboratory and numerical study at the Tajkuh lead–zinc mine [Volume 4, Issue 1, 2026, Pages 1-16]
Jahanmiri, Shirin Critical Review of Scientific Studies on Rock Brittleness Index: An Overview Analysis [Volume 1, Issue 3, 2023, Pages 103-110]
Jahanshahi, Hamid Mapping solar energy potential in the mining sector: A hybrid Fuzzy-AHP approach in South Khorasan Province, Iran [Volume 4, Issue 1, 2026, Pages 17-37]
John Mdee, Ombeni JohnEvaluating the performance of operational variables in the sodium cyanide gold leaching process: A review article [Volume 4, Issue 2, 2026, Pages 143-165]
Joodi, Ali Reducing the Concentrate Ash Content of Coal Flotation by Changing the Operating Parameters [Volume 1, Issue 1, 2023, Pages 30-36]
K
Kaheni, Komeil Geostatistical Assessment of Ore Reserve Estimation Accuracy in the Hired Gold Deposit [Volume 3, Issue 3, 2025, Pages 155-164]
Kalhor Mohammadi, Mojtaba Optimizing Drilling Fluid Properties Using Deep Learning Algorithms to Reduce Drilling Problems in a Middle Eastern Oil Field [Volume 2, Issue 1, 2024, Pages 1-12]
Karamoozian, Mohammad Reducing the Concentrate Ash Content of Coal Flotation by Changing the Operating Parameters [Volume 1, Issue 1, 2023, Pages 30-36]
Karimi, Mehdi A Review on the Heap Bioleaching of Copper from Low-Grade Fine Tailings [Volume 1, Issue 4, 2023, Pages 150-158]
Karimi Rad, Mohammad Saeed Optimizing Drilling Fluid Properties Using Deep Learning Algorithms to Reduce Drilling Problems in a Middle Eastern Oil Field [Volume 2, Issue 1, 2024, Pages 1-12]
Karrari, Seyed Sajjad Predicting uniaxial compressive strength of different rocks using principal component analysis and deep neural network [Volume 2, Issue 2, 2024, Pages 78-89]
Khajouei Sirjani, Abbas Field evaluation of air-deck blasting for improving rock fragmentation at the Gol-e-Gohar no. 1 open-pit iron ore mine, Iran [Volume 4, Issue 1, 2026, Pages 68-78]
Khakshour, Hossain Investigating the effect of Beecher type fractures on tunnel displacement using the finite element method [Volume 1, Issue 1, 2023, Pages 1-6]
Khakshour, Hossein Studying the effect of coal strength parameters on coal and gas outburst: a case study of Tabas coal mine [Volume 1, Issue 2, 2023, Pages 47-55]
Khalesi, Mohammad Reza Reconciliation of data with non-random errors [Volume 1, Issue 4, 2023, Pages 171-178]
Khosravi, Mohammad Hossein Estimation of passive earth pressure against a battered rigid retaining wall in cohesive-frictional backfill [Volume 1, Issue 1, 2023, Pages 22-29]
Khosravi, Mohammad Hossein Investigation of the Effect of Rock characteristics on Crack Initiation and Crack Damage Stress Levels in Intact Rock Direct Shear Tests [Volume 2, Issue 1, 2024, Pages 43-49]
L
Lafta, Fatima Ulzahra HayderPredictive Study to Identify the Sanding Initiation Threshold Depending on Physical and Mechanical Rock Characteristics [Volume 3, Issue 3, 2025, Pages 174-181]
Lajevardi, Banafsheh Sadat Numerical study of the effect of orientation and infilling material of joint on the strength and deformation behavior of jointed rock [Volume 2, Issue 2, 2024, Pages 90-101]
M
Mahjoore, Majid Sunlight-assisted degradation of bromocresol green using Co3O4 nanoparticles as a high performance photocatalyst [Volume 1, Issue 1, 2023, Pages 7-12]
Masood, Khadija Manufacturing Of Cement And Petrography Of Its Raw Materials [Volume 2, Issue 2, 2024, Pages 50-57]
Masoudi, Majid Statistical analysis and validation of the cement slurry flow rate calculated by analytical and numerical models in the grouting process [Volume 3, Issue 2, 2025, Pages 82-92]
Masoudi, Majid Field-Based Assessment of Analytical and Statistical Grout Take Models: Case Studies [Volume 3, Issue 4, 2025, Pages 215-224]
Massinaei, Mohammad Measurement of wear pattern of studs on High-Pressure Grinding Rolls (HPGR) [Volume 1, Issue 2, 2023, Pages 75-80]
Meybodi, Enayatallah EmamiEngineering Geological Modeling and Stability Assessment of the Niasar Waterfall Slope Using Advanced Zonation Techniques [Volume 3, Issue 4, 2025, Pages 225-238]
Mirzaei-Nasirabad, Hossein Evaluating the performance of the DISPATCH algorithm, a commercial software, in the Sungun copper mine [Volume 1, Issue 3, 2023, Pages 117-122]
Mohammed, Aban OthmanPredictive Study to Identify the Sanding Initiation Threshold Depending on Physical and Mechanical Rock Characteristics [Volume 3, Issue 3, 2025, Pages 174-181]
Mohammed Ameen, Ali YahyaPredictive Study to Identify the Sanding Initiation Threshold Depending on Physical and Mechanical Rock Characteristics [Volume 3, Issue 3, 2025, Pages 174-181]
Mohtasham, Mehrnaz Evaluating the performance of the DISPATCH algorithm, a commercial software, in the Sungun copper mine [Volume 1, Issue 3, 2023, Pages 117-122]
Mokhtari, Ahmad Reza Geostatistical Assessment of Ore Reserve Estimation Accuracy in the Hired Gold Deposit [Volume 3, Issue 3, 2025, Pages 155-164]
Mokhtarian, Ali Comparative study of the effect of additives in water-based drilling mud on filtrate volume, along with presentation of an artificial neural network estimator model [Volume 4, Issue 2, 2026, Pages 115-130]
Mokhtarian, Hadi Impact of Infill Materials of Discontinuities with Different Orientations on Triaxial Compressive Strength of Jointed Rock [Volume 2, Issue 1, 2024, Pages 36-42]
Moomivand, Hassan Impact of Infill Materials of Discontinuities with Different Orientations on Triaxial Compressive Strength of Jointed Rock [Volume 2, Issue 1, 2024, Pages 36-42]
Moradi, Siamak Predicting uniaxial compressive strength of different rocks using principal component analysis and deep neural network [Volume 2, Issue 2, 2024, Pages 78-89]
Moradzadeh, Ali Geoelectrical modeling of time-domain electrical resistivity and induced polarization data for imaging marble building stone [Volume 3, Issue 1, 2025, Pages 70-81]
Mortezavi Nezhad, Mohammad Investigating the effect of Beecher type fractures on tunnel displacement using the finite element method [Volume 1, Issue 1, 2023, Pages 1-6]
Mosingo, Jeremiah Evaluating the performance of operational variables in the sodium cyanide gold leaching process: A review article [Volume 4, Issue 2, 2026, Pages 143-165]
N
Najafi, Mehdi Analysis of methane emissions sources into the environment of the longwall mining during coal extraction (A case Study) [Volume 2, Issue 1, 2024, Pages 13-20]
Najafi Shahali Bagloo, Hossein Minerals chemistry and petrogenesis of metamorphic rocks of Anjul area, south west of Qayen [Volume 1, Issue 2, 2023, Pages 56-67]
Nakhaei, Malieh Application of multivariate decision-making algorithms in the mineral potential mapping; Case study: West Basiran, South Khorasan Province [Volume 1, Issue 1, 2023, Pages 13-21]
Noaparast, Mohammad Beneficiation of low-grade iron ore using individual and combined gravity and magnetic methods [Volume 4, Issue 2, 2026, Pages 91-101]
Noferesti, Hossain Studying the effect of coal strength parameters on coal and gas outburst: a case study of Tabas coal mine [Volume 1, Issue 2, 2023, Pages 47-55]
Noferesti, Hossain Reliability analysis of a fleet of mining trucks (A case study in Iran) [Volume 1, Issue 2, 2023, Pages 68-74]
Noferesti, Hossain Support of squeezing rocks in underground coal mines, case study: slope no. 2 of Parvadeh no. 1 mine [Volume 4, Issue 2, 2026, Pages 131-142]
Noorian-Bidgoli, Majid Critical Review of Scientific Studies on Rock Brittleness Index: An Overview Analysis [Volume 1, Issue 3, 2023, Pages 103-110]
Noorian-Bidgoli, Majid Impact of Infill Materials of Discontinuities with Different Orientations on Triaxial Compressive Strength of Jointed Rock [Volume 2, Issue 1, 2024, Pages 36-42]
Noorian-Bidgoli, Majid Numerical study of the effect of orientation and infilling material of joint on the strength and deformation behavior of jointed rock [Volume 2, Issue 2, 2024, Pages 90-101]
Noorian-Bidgoli, Majid Rock mass sensitivity and stability of unsupported sublevel stopes: An integrated laboratory and numerical study at the Tajkuh lead–zinc mine [Volume 4, Issue 1, 2026, Pages 1-16]
Nowrouzi, Gholamreza Application of SAM and MTMF Methods in Differentiating Hydrothermal Alterations Related to Metallic Mineralization Potential, Nignan Exploration Area [Volume 2, Issue 2, 2024, Pages 102-120]
Nowrouzi, Gholamreza Prediction of Slope Stability in Open-Pit Mines Using Intelligent Algorithms: SVM and RF Optimized by Genetic Algorithm [Volume 3, Issue 2, 2025, Pages 106-116]
Ntalikwa, Justin WEvaluating the performance of operational variables in the sodium cyanide gold leaching process: A review article [Volume 4, Issue 2, 2026, Pages 143-165]
P
Pipatpongsa, Thirapong Estimation of passive earth pressure against a battered rigid retaining wall in cohesive-frictional backfill [Volume 1, Issue 1, 2023, Pages 22-29]
Pouresmaieli, Mahdi Mapping solar energy potential in the mining sector: A hybrid Fuzzy-AHP approach in South Khorasan Province, Iran [Volume 4, Issue 1, 2026, Pages 17-37]
Pouryazdanpanah, Reza Production Scheduling of Sublevel Caving underground mining method Using a conceptual Linear Modeling and by considering of ventilation constraints [Volume 3, Issue 1, 2025, Pages 1-7]
R
Rafieenia, Elham Prediction of Slope Stability in Open-Pit Mines Using Intelligent Algorithms: SVM and RF Optimized by Genetic Algorithm [Volume 3, Issue 2, 2025, Pages 106-116]
RafieGandomkari, MohammadReza Geomechanical Modeling and Sensitivity Analysis of Fracture Propagation in Hydraulic Fracturing Operation [Volume 3, Issue 4, 2025, Pages 263-272]
Rahimdel, Mohammad Javad Reliability analysis of a fleet of mining trucks (A case study in Iran) [Volume 1, Issue 2, 2023, Pages 68-74]
Rahimdel, Mohammad Javad Environmental Risk Analysis of Mine Tailings Dam (A Case Study in Iran) [Volume 2, Issue 1, 2024, Pages 21-26]
Rahimdel, Mohammad Javad Assessment of Environmental Hazards in a Mine Tailings Dam Using the Fuzzy SAM Method [Volume 3, Issue 3, 2025, Pages 182-187]
Rahimi, Mojtaba Design of Wellbore Trajectory Using Geomechanical Modeling for Improving Wellbore Stability: A Case Study [Volume 2, Issue 1, 2024, Pages 27-35]
Rahimi, Mojtaba Application of Geomechanical Modeling and Determination of Optimal Rock Fracture Criteria in the Design of Mud Weight in One of the Southern Iraq Oil Fields [Volume 3, Issue 1, 2025, Pages 8-23]
Rahimi, Mojtaba Use of Well Logging Data to Estimate Fluid Saturation Based on Artificial Neural Network Algorithms [Volume 3, Issue 2, 2025, Pages 93-105]
Rahimi, Mojtaba Artificial Intelligence Methods for Estimation of Formation Porosity from Well Logging Data [Volume 3, Issue 2, 2025, Pages 126-139]
Rahimi, Mojtaba Geomechanical Modeling and Sensitivity Analysis of Fracture Propagation in Hydraulic Fracturing Operation [Volume 3, Issue 4, 2025, Pages 263-272]
Rahimi, Mojtaba Improving the accuracy of critical downhole equipment detection using unsupervised machine learning and deep learning methods [Volume 4, Issue 1, 2026, Pages 38-52]
Rahimi, Mojtaba Comparative study of the effect of additives in water-based drilling mud on filtrate volume, along with presentation of an artificial neural network estimator model [Volume 4, Issue 2, 2026, Pages 115-130]
Rahmani, Zakaria Reliability analysis of a fleet of mining trucks (A case study in Iran) [Volume 1, Issue 2, 2023, Pages 68-74]
Rezakhani, Parisa Application of Supervised Machine Learning Inversion in the Estimation of Iron Ore Grade from Geophysical Data: Comparative Investigation of GB, RF and SVM Algorithms [Volume 1, Issue 3, 2023, Pages 123-136]
Rooki, Reza Artificial Intelligence Methods for Estimation of Formation Porosity from Well Logging Data [Volume 3, Issue 2, 2025, Pages 126-139]
S
Saedi, Gholamreza Estimation of passive earth pressure against a battered rigid retaining wall in cohesive-frictional backfill [Volume 1, Issue 1, 2023, Pages 22-29]
Safari, Mohsen Stability Analysis and Support System Timing for Mine Block 3 of Parvadeh 4 Coal Mine Using Numerical Modelling [Volume 3, Issue 1, 2025, Pages 24-35]
Safari, Mohsen Mapping solar energy potential in the mining sector: A hybrid Fuzzy-AHP approach in South Khorasan Province, Iran [Volume 4, Issue 1, 2026, Pages 17-37]
Safari, Mohsen Ventilation system design and main fan selection for block 3 of the Parvadeh 4 coal mine based on three-dimensional airflow simulation [Volume 4, Issue 1, 2026, Pages 79-90]
Salman, Umulbaneen HasanPredictive Study to Identify the Sanding Initiation Threshold Depending on Physical and Mechanical Rock Characteristics [Volume 3, Issue 3, 2025, Pages 174-181]
Salsabili, Mohammad Application of Supervised Machine Learning Inversion in the Estimation of Iron Ore Grade from Geophysical Data: Comparative Investigation of GB, RF and SVM Algorithms [Volume 1, Issue 3, 2023, Pages 123-136]
Samiei, Saeed Hydrogeological Risk Assessment of Tunnel Excavation Using a Hybrid AHP-AI Model: A Case Study [Volume 3, Issue 2, 2025, Pages 140-146]
Sanandaji, Faramarz Intensified photodegradation of organic dyes using Bi-doped ZnO nanoparticles [Volume 1, Issue 4, 2023, Pages 159-164]
Sarfaraz, Hassan Estimation of passive earth pressure against a battered rigid retaining wall in cohesive-frictional backfill [Volume 1, Issue 1, 2023, Pages 22-29]
Sedighi, Mahsa The Role of Nanoclay in the Soil Stabilization: A Short Viewpoint [Volume 1, Issue 2, 2023, Pages 92-102]
Sereshki, Farhang Field evaluation of air-deck blasting for improving rock fragmentation at the Gol-e-Gohar no. 1 open-pit iron ore mine, Iran [Volume 4, Issue 1, 2026, Pages 68-78]
Shademan, Marzieh Contribution of geostatistical modeling on simulating a geomechanical parameter (case study: GSI in Gol-Gohar open pit iron mine, Kerman, southeastern Iran) [Volume 1, Issue 2, 2023, Pages 81-91]
Simorgh, Mohsen Application of Supervised Machine Learning Inversion in the Estimation of Iron Ore Grade from Geophysical Data: Comparative Investigation of GB, RF and SVM Algorithms [Volume 1, Issue 3, 2023, Pages 123-136]
Soltani Mohammadi, Saeed Statistical analysis and validation of the cement slurry flow rate calculated by analytical and numerical models in the grouting process [Volume 3, Issue 2, 2025, Pages 82-92]
Sori, Abobakr Improving the accuracy of critical downhole equipment detection using unsupervised machine learning and deep learning methods [Volume 4, Issue 1, 2026, Pages 38-52]
T
Taheri, Ehsan Numerical Analysis of Time-Dependent Behavior of Salt Cavern with Weak Interlayer [Volume 3, Issue 1, 2025, Pages 55-69]
Tahmasbi Nowtarki, Kourosh Optimizing Drilling Fluid Properties Using Deep Learning Algorithms to Reduce Drilling Problems in a Middle Eastern Oil Field [Volume 2, Issue 1, 2024, Pages 1-12]
V
Vafaei Poursorkhabi, Ramin Seismic Analysis of Sediments in the Tabriz Plain Using Metaheuristic Algorithms and Shear Wave Velocity Modeling [Volume 2, Issue 2, 2024, Pages 58-68]
Y
Yousefzadeh, Mohammad Hossein Petrology of the Metabasites of Dezg ophiolite melange complex, South-East of Qayen [Volume 1, Issue 1, 2023, Pages 37-46]
Yousefzadeh, Mohammad Hossein Minerals chemistry and petrogenesis of metamorphic rocks of Anjul area, south west of Qayen [Volume 1, Issue 2, 2023, Pages 56-67]
Yousefzadeh, Mohammad Hossein Petrology and temperature determination of skarn formation in Dezg area, southwestern of Hajiabad, north of Birjand [Volume 2, Issue 2, 2024, Pages 69-77]
Z
Zare, Ali Recovery of Iron Ore From The Tailings of Tang Zagh Iron Beneficiation Plant: A Comparative Study of Gravity and Magnetic Separation Methods [Volume 1, Issue 3, 2023, Pages 137-143]
Zare, Ali Beneficiation of low-grade iron ore using individual and combined gravity and magnetic methods [Volume 4, Issue 2, 2026, Pages 91-101]
Zarean, Ahmad Seismic Analysis of Sediments in the Tabriz Plain Using Metaheuristic Algorithms and Shear Wave Velocity Modeling [Volume 2, Issue 2, 2024, Pages 58-68]
Zaremotlagh, Soheil Comparative Evaluation of Dimensionality Reduction Methods for Lithological Unit Discrimination Based on Multi-Element Geochemical Data [Volume 3, Issue 3, 2025, Pages 188-200]
